TUNE
LEVEL - Pitch offset in semitones.
PORTAMENTO
LEVEL (GLIDE) - Portamento rate.
DYNAMICS
VEL. SEN. - determines how Expression control affects volume. In the off position (full counter clockwise) Expression has no effect and volume is not attenuated. Full clockwise and Expression has full effect. Use this setting to allow some degree of control over dynamics with Expression but not enough so that Express can turn it full off. All other module parameters should not be adjusted.
EXPRESSION
LEVEL - MIDI controlled Expression input
MORPH
MORPH1 (TIMBRE ADJUST). - morphing control using Defined Timbre relative adjustment.
MORPH2 (MODWHEEL). - morphing control using ModWheel. Intended for controlling "motion" aspects of a patch.
MORPH3 (FOOT CONTROLLER). - morphing control using Foot Controller. Intended for controlling timbral character of patch.
MORPH4 (AFTERTOUCH). - morphing control using After Touch. Used to control effects aspects of patch.
MORPH2 (MODWHEEL). - morphing control using ModWheel. Intended for controlling "motion" aspects of a patch.
MORPH3 (FOOT CONTROLLER). - morphing control using Foot Controller. Intended for controlling timbral character of patch.
MORPH4 (AFTERTOUCH). - morphing control using After Touch. Used to control effects aspects of patch.
FILTER ACCENT
VEL. SEN. - determines how Velocity control affects filter envelope amount. In the off position (full counter clockwise) Velocity has no effect and the EG affects the filter normally. Full clockwise and Velocity has full effect, causing the amplitude of the filter EG depth to track Velocity exactly. This setting can be used to determine how much accented notes affect filter cutoff.
L. GAIN - Sets Velocity curve below keyboard breakpoint.
BRK. PT. - Which note defines upper and lower.
R. GAIN - Sets Velocity curve above keyboard breakpoint.
L. GAIN - Sets Velocity curve below keyboard breakpoint.
BRK. PT. - Which note defines upper and lower.
R. GAIN - Sets Velocity curve above keyboard breakpoint.
AMP ACCENT
VEL. SEN. - determines how Velocity control affects AMP envelope amount. In the off position (full counter clockwise) Velocity has no effect and the AMP envelope operates normally. Full clockwise and Velocity has full effect, causing the amplitude of the AMP envelope depth to track Velocity exactly. This setting can be used to determine how much accented notes affect volume.
L. GAIN - Sets Velocity curve below keyboard breakpoint.
BRK. PT. - Which note defines upper and lower.
R. GAIN - Sets Velocity curve above keyboard breakpoint.
L. GAIN - Sets Velocity curve below keyboard breakpoint.
BRK. PT. - Which note defines upper and lower.
R. GAIN - Sets Velocity curve above keyboard breakpoint.
ACCENT
FADE - This is a bipolar control. In the middle setting (MIDI Value = 64) the velocity received affects the patch, as determined by Filter Accent and AMP Accent and Filter Cutoff Accent, with maximum dynamic range. Increasing the value diminishes the dynamic range while gradually moving the mid-value up towards full velocity. Lowering the value also diminishes the dynamic range until at a value of zero there is no velocity effect and the effective velocity sent for further processing is mid-value (64).