OSC 1
COARSE FREQUENCY - determines the tuning of both OSC1 and OSC2.

FINE FREQUENCY - sets fine frequency for both OSC1 and OSC2.

KBT - should be off as pitch from keyboard is routed through Glide.

WAVE SELECT (OSC1 WAVE) - OFF, SINE, TRIANGLE, SAW, PULSE.

PITCH MA1 - should be full on as this is the pitch control from the glide circuit. Adjust to less then full if normal key-tracking is not desired.

PITCH MA2 - should be full on as this is the input from the instrument TUNE control.

PWM - should be full on as it is driven by external pulse width controls.
PULSE WIDTH
LEVEL (OSC1 PW) - determines starting pulse width of OSC1 PULSE output.
PWM
LIN - Should not be adjusted.

INV1 - Should not be adjusted.

MIX1 - Amount of EG applied to modulate pulse width of OSC1.

INV2 - Should not be adjusted.

MIX2 - Should not be adjusted.
OSC 2
DETUNE (OSC2 PITCH OFFSET) - Coarse adjust of ration between OSC1 and OSC2 frequency.

FINE (DETUNE) - fine adjustment of frequency ratio between OSC1 and OSC2.

WAVE SELECT (OSC2 WAVE) - OFF, SINE, TRIANGLE, SAW, PULSE.

FMA (FM DEPTH) - FM depth control.
OSC BALANCE
BALANCE MA - How much balance modulation from EG.

BALANCE (OSC BAL) - OSC1 to OSC2 mix. Full counterclockwise is OSC1 only, Full clockwise is OSC2 only.
OSC MOD
SWITCH1 (SYN) - Enable OSC2 to be synced by OSC1.
SWITCH2(AM) - Enable OSC2 to be amplitude modulated by OSC1.
SWITCH3(FM) - Enable OSC2 to be frequency modulated by OSC1.

SWITCH4(OFF) - No modulation.